Electrical Distribution

100 ampere busway is an alternative to cable in supplying small blocks of power for the normal commercial and industrial power systems. 100 ampere busway is practical for small shops, laboratories, classrooms, and light manufacturing.

Product Description

• Plug-in busway
• 100 ampere copper
• Straight sections of plug-in busway.
• 3-phase 3-wire, 3-phase 4-wire, and 1-phase 3-wire applications.

Options and Accessories

100 Ampere Busway Plug-in Units
Power is distributed by use of plug-in devices which plug-in through the insulated outlets of the busway enclosure and engage the bus conductors with stabs. Devices are available with overcurrent protection or without. All plug-in units have a neutral stab and are suitable for 1-phase 3-wire, 3-phase 3-wire, and 3-phase 4-wire applications. All plug-in units have field mountable ground stab.

Fusible Units
Fusible units are available for 30A, 60A, and 100A service for 240 or 600 volts.

Circuit Breaker Units
If you are using circuit breaker units, the Load must be distributed evenly among A, B and C phases. To accomplish this, distribute the load evenly among 1-, 2-, and 3-pole breakers. Available are Quicklag "HQP" circuit breaker units for 50A-240V maximum service, "EHD, FDB and FD" circuit breakers for 100A – 600V maximum service.

External Handle Operating Mechanism
An external operating mechanism is attached on top of the breaker switch for hookstick or chain operation. This is available for all circuit breakers.

Receptacle Enclosures
The receptacle enclosures (loadcenters) include space for three (3) breaker poles and provisions for one, two, or three conventional, single-gang outlets, and blank covers to fill unused spaces. Includes neutral stab. Does not include breakers, outlets or wiring. The enclosure, circuit breaker (if required), and ground are ordered separately and shipped unassembled. If the unit is to be factory assembled, please indicate on the order, add 15% to the total price, and allow additional time for shipment.